All Plumbing Repairs and Services

Mon-Sat: 07:00 - 17:00

24h Emergency Service

Get Warranty

Register Your Warranty

Call Today 222 468 532

Manhattan, NY 10039

10 Common Plumbing Problems and How to Fix Them

Plumbing issues can be a homeowner’s worst nightmare, causing inconvenience and sometimes hefty repair bills. However, many common plumbing problems can be resolved with a bit of know-how and some basic tools. In this blog post, we’ll explore ten frequent plumbing issues and provide step-by-step solutions to fix them.

1. Dripping Faucets

A dripping faucet is not just annoying; it also wastes water. The usual cause is a worn-out washer or O-ring.

How to Fix:

  • Turn off the water supply.
  • Remove the faucet handle.
  • Replace the worn-out washer or O-ring.
  • Reassemble the faucet and turn the water back on.

2. Slow Draining Sink

A slow draining sink is often caused by a buildup of debris like hair, soap, and grease.

How to Fix:

  • Use a plunger to dislodge the blockage.
  • If plunging doesn’t work, try a drain snake or a wire hanger to remove the clog.
  • For persistent problems, a mixture of baking soda and vinegar followed by hot water can help break down the buildup.

3. Clogged Toilet

A clogged toilet is a common issue that can often be resolved without calling a plumber.

How to Fix:

  • Use a toilet plunger to try and dislodge the blockage.
  • If that doesn’t work, a toilet auger (plumbing snake) can reach deeper clogs.
  • Avoid using chemical drain cleaners as they can damage the pipes.

4. Running Toilet

A running toilet can waste a significant amount of water. The problem usually lies with the flapper valve or the fill valve.

How to Fix:

  • Open the toilet tank and inspect the flapper valve. If it looks worn or doesn’t seal properly, replace it.
  • If the fill valve is the issue, adjust the float or replace the fill valve assembly.

5. Low Water Pressure

Low water pressure can be due to various issues, including sediment buildup in pipes, a faulty pressure regulator, or leaks.

How to Fix:

  • Clean the aerator on faucets and showerheads to remove sediment.
  • Check for leaks in the plumbing system.
  • If the problem persists, the pressure regulator might need adjustment or replacement.

6. Leaky Pipes

Leaky pipes can cause water damage and increase your water bill. Common causes include corrosion, joint damage, or excessive water pressure.

How to Fix:

  • Identify the leak source.
  • For small leaks, use a pipe repair clamp or epoxy putty.
  • For more extensive damage, you might need to replace the section of the pipe.

7. Water Heater Issues

Problems with your water heater can result in no hot water or inconsistent water temperatures.

How to Fix:

  • Check the thermostat settings and adjust if necessary.
  • Flush the water heater tank to remove sediment buildup.
  • If the problem persists, the heating element may need to be replaced.

8. Sump Pump Failure

A sump pump is crucial for preventing basement flooding. If it fails, it could be due to a power outage, clogged discharge pipe, or a faulty float switch.

How to Fix:

  • Ensure the pump has power and is plugged in properly.
  • Clean the discharge pipe to remove any obstructions.
  • Test the float switch and replace it if it’s not working correctly.

9. Garbage Disposal Jams

A jammed garbage disposal can be a real hassle and usually results from overloading or attempting to grind inappropriate items.

How to Fix:

  • Turn off the disposal and unplug it.
  • Use an Allen wrench to turn the disposal motor manually and free the jam.
  • Remove any large debris causing the jam.
  • Reset the disposal unit if it has a reset button.

10. Sewer System Backup

A sewer system backup is a serious issue that requires immediate attention. It can be caused by tree roots, blockages, or damaged sewer lines.

How to Fix:

  • Avoid using the plumbing system until the problem is resolved.
  • Use a plumbing snake to try and clear the blockage.
  • For significant issues, call a professional plumber as you may need to replace damaged sewer lines.

Conclusion

Plumbing problems can range from minor inconveniences to major headaches. By understanding the common issues and knowing how to address them, you can save time and money. Always remember, for complex problems or if you’re unsure about any repair, it’s best to consult a professional plumber. Regular maintenance and timely fixes can keep your plumbing system in good shape and prevent costly repairs down the line.

Whether you’re dealing with a dripping faucet or a clogged toilet, these DIY solutions can help you tackle common plumbing issues with confidence. Happy fixing!

Leave a Reply

Your email address will not be published. Required fields are marked *

About

Professional Plumbers Denver, offers a variety of services to meet your construction needs, from a simple plumbing fixture repair or replace to a residential / Commercial plumbing system install. We believer every project should be treated as we are doing it for our family. Your satisfaction is our long term goal.

X