Furnace Replacement & Installation in Denver, CO
Gas, electric and high-efficiency furnaces sized for your Denver home, with an in-home assessment, a clear estimate and a tested installation. Free on-site assessment.
Call (720) 390-2652 | Request a Furnace Replacement Estimate
Carbon monoxide alarm sounding? Leave the home and call 911.
Enter your contact details here
Furnace Replacement in Denver, CO
Denver winters are long, and a furnace that is failing or no longer worth repairing can leave a home cold and costly to heat. Professional Plumbers Denver helps homeowners decide whether to repair or replace a furnace, and installs a new heating system that fits the home. If your furnace is old, inefficient or past the point of repair, we can recommend and install a replacement.
A new furnace is more than swapping a box. The right system depends on your home’s size, layout, insulation, ductwork and fuel. We start with an assessment and explain your options before you decide.
Signs It May Be Time to Replace Your Furnace
- Age. Many furnaces last roughly 15 to 20 years, though it varies with the unit and how it was maintained. Older furnaces lose efficiency and reliability.
- Frequent repairs. If you call for repairs most winters, repair costs add up and an aging furnace may cost more to keep fixing than to replace.
- Rising energy bills. An older, less efficient furnace uses more fuel to heat the same space.
- Uneven heating. Cold rooms or a furnace that cycles on and off often may mean the system no longer fits the house.
- Strange noises. Banging, rattling or grinding can point to a serious mechanical problem.
- A cracked heat exchanger or other safety problem. A damaged heat exchanger can allow carbon monoxide to escape. If a technician finds one, replacement is often the safe choice.
If you are not sure, we can inspect the system and tell you honestly whether repair or replacement makes sense. See our furnace repair and furnace maintenance pages.
Not sure what you need? Call (720) 390-2652.
Furnace Types and Efficiency
| Option | How it works | Good to know |
|---|---|---|
| Gas furnace | Burns natural gas to heat air that is distributed through ducts | The most common choice in homes with natural gas. Needs a gas connection and venting |
| High-efficiency gas furnace (90 percent AFUE or higher) | Extracts more heat from the fuel and vents through plastic pipe | Uses less fuel, but needs proper venting and a condensate drain |
| Standard-efficiency gas furnace (about 80 percent AFUE) | Uses a traditional metal flue | Costs less up front, but wastes more heat |
| Electric furnace | Heats air with electric elements | No gas needed, but operating costs are often higher |
| Heat pump or dual-fuel | Moves heat instead of burning fuel, sometimes paired with a gas furnace | Can heat and cool. See our heat pump page |
AFUE stands for annual fuel utilization efficiency, the share of fuel that becomes heat. Furnaces also come as single-stage, two-stage or modulating, and with variable-speed blowers. More stages generally mean steadier temperatures and quieter operation, usually at a higher price. We explain which features are worth it for your home.
How We Size and Choose Your New Furnace
A furnace that is too small cannot keep the house warm, and one that is too large short-cycles, wears out sooner and heats unevenly. We size the system using a load calculation, not by copying the old unit, based on your home’s size, insulation, windows and the condition of your ductwork. We also check the venting, the gas line size, the electrical connection and the thermostat. Denver’s elevation affects how gas appliances burn, so the equipment must be set up correctly for it. See our gas line services page if the gas supply needs work.
Our Furnace Replacement Process
- In-home assessment. We examine your current furnace, ductwork, venting, gas and electrical connections.
- Options and estimate. We explain your choices in plain English and give you a clear written estimate before work begins.
- Permit. Furnace replacement generally needs a permit and inspection. We explain who handles it.
- Removal and installation. We remove the old furnace and install the new one with venting, gas and electrical connections, a condensate drain if needed, and a compatible thermostat.
- Testing and safety checks. We test the gas connections for leaks, check combustion and venting, check airflow and verify that the furnace runs safely.
- Walkthrough. We show you how to operate and care for the new system.
Safety and Permits
A gas furnace involves gas piping, combustion, venting and electricity, so it is not a do-it-yourself project. Incorrect work can cause gas leaks or carbon monoxide poisoning. Install carbon monoxide alarms on each level and near sleeping areas, and see our home safety upgrades page. In Denver, replacing a furnace generally requires a permit and inspection through Community Planning and Development, but requirements depend on the work and the property. Confirm with the city, or ask us what applies before we start.
What Affects the Cost of Furnace Replacement in Denver?
There is no single price. Cost depends on the furnace type, size and efficiency, the number of stages and blower type, the condition of the ductwork, venting and gas line changes, electrical work, the thermostat, permit fees and how easy the equipment is to reach. We provide a free on-site assessment and a written estimate before work begins. Utility and local incentives for efficient equipment change often, so check current programs before you buy.
Furnace Replacement vs. Repair vs. Maintenance
| Option | Best for | Page |
|---|---|---|
| Repair | A working furnace with a specific problem | Furnace repair |
| Maintenance | Keeping a healthy furnace safe and efficient | Furnace maintenance |
| Replacement | An old, inefficient, unsafe or failing furnace | This page |
If your air conditioner is also aging, ask us about replacing both at the same time. See our AC replacement page.
Why Choose Professional Plumbers Denver
- Honest guidance. We tell you when repair is enough and replacement is not needed.
- Free on-site assessment and a written estimate before work begins.
- Plumbing, gas and electrical under one roof, which helps when a furnace swap touches all three.
- Serving Denver since 2005.
- Local office at 4400 S Quebec St, Suite 208, Denver, CO 80237.
Furnace Replacement in Denver and Nearby Areas
We serve Denver and nearby communities, including Aurora, Lakewood, Englewood, Littleton, Centennial, Highlands Ranch, Louisville and Parker. See all service areas.
Schedule Furnace Replacement in Denver
If your furnace is old, failing or costing too much to repair, call Professional Plumbers Denver or request a free on-site assessment before the coldest weather arrives.
Call (720) 390-2652 or request an estimate.
Professional Plumbers Denver, 4400 S Quebec St, Suite 208, Denver, CO 80237 | info@professional-plumbers-denver.com | Open 24 hours, 7 days a week
Furnace Replacement FAQs
It depends on the furnace type, size and efficiency, the condition of the ductwork, venting and gas line changes, electrical work, the thermostat and permit fees. There is no single price, so we provide a free on-site assessment and a written estimate before work begins. Utility and local incentives for efficient equipment change often, so check current programs before you buy.
If the furnace is roughly 15 to 20 years old, needs repairs most winters, heats unevenly, or has a cracked heat exchanger or another safety problem, replacement is usually the safer and cheaper long-term choice. If it has one specific problem and is otherwise sound, repair is usually worth it. If you are not sure, we can inspect the system and tell you honestly which makes sense.
We size it using a load calculation based on your home's size, insulation, windows and ductwork, not by copying the old unit. A furnace that is too small cannot keep the house warm, and one that is too large short-cycles, wears out sooner and heats unevenly. Denver's elevation also affects how gas appliances burn, so the equipment must be set up correctly for altitude.
It depends on the system, the ductwork, venting and gas or electrical work involved. The process is an in-home assessment, options and a written estimate, permit, removal and installation, testing and safety checks, then a walkthrough. We give you a timeline with your estimate.
Usually not. Most manufacturer warranties cover parts, not the labour to install the furnace. Ask what labour coverage is included when you get your written estimate, so you know what is covered by the manufacturer and what is covered by the installer.
Costco does not install furnaces with its own technicians. Where it offers furnaces, installation is handled by a local contractor partner. We install furnaces ourselves — assessment, installation, testing and walkthrough — so the company you call is the company doing the work.
Most Denver homes with natural gas use a gas furnace. A high-efficiency gas furnace (90 percent AFUE or higher) uses less fuel but needs proper venting and a condensate drain, while a standard-efficiency furnace (about 80 percent AFUE) costs less up front but wastes more heat. An electric furnace needs no gas, but operating costs are often higher. A heat pump or dual-fuel system can heat and cool. We explain which option fits your home.
Generally yes. Replacing a furnace in Denver generally requires a permit and inspection through Community Planning and Development, but requirements depend on the work and the property. We explain who handles the permit before work starts.
Look for a company that does an in-home assessment, sizes the furnace with a load calculation, gives a written estimate before work begins, explains the permit, and tests gas connections, combustion, venting and airflow after installation. Check that it has a local office you can reach. Our office is at 4400 S Quebec St, Suite 208, Denver, CO 80237.
Professional Plumbers Denver installs and replaces furnaces in Denver and nearby communities, including Aurora, Lakewood, Englewood, Littleton, Centennial, Highlands Ranch, Louisville and Parker. Call (720) 390-2652 for a free on-site assessment.



