Furnace Repair in Denver, CO
No heat on a cold Denver morning, a furnace that bangs or cycles on and off, a flame that looks wrong: these are the problems that send people looking for furnace repair. Professional Plumbers Denver diagnoses and repairs furnaces in Denver homes. We find out what is wrong, explain it in plain words and give you an estimate before we fix anything. Read on to see the signs, the repairs we handle and what affects the cost, or call (720) 390-2652 to talk to our team.
Enter your contact details here
Signs You Need Furnace Repair
Some problems announce themselves, and others build quietly. Call us if you notice any of these.
No Heat or Weak Heat
The furnace runs but the air stays cool, or some rooms never warm up. Causes range from a clogged filter or a thermostat problem to an ignition failure, a bad blower or a safety control that has shut the furnace down.
Strange Noises
Banging, squealing, rattling or grinding mean something is loose, worn or dirty. A noisy blower motor or bearing is a common reason, and running a furnace with a failing part can make the damage worse.
Short Cycling
A furnace that turns on and off every few minutes is short cycling. It can be caused by a dirty filter, an overheating furnace, a thermostat fault or a flame sensor that needs attention. It wears the equipment and wastes fuel.
Yellow or Flickering Flame
A healthy gas flame is steady and mostly blue. A yellow or flickering flame can point to a combustion problem, and combustion problems can involve carbon monoxide. Treat it as a safety issue and call us promptly.
Higher Heating Bills
If your bill climbs and your habits have not changed, the furnace may be working harder than it should. A dirty system, failing component or leaking ductwork could be the cause.
What to Do If Your Furnace Stops Working
A few quick checks can save a service call, and they are safe for any homeowner.
- Make sure the thermostat is set to heat and the temperature is above the room temperature, and replace its batteries if it uses them.
- Check the air filter. A clogged filter can shut a furnace down.
- Check that the furnace switch and the breaker are on.
- Look at the vents and returns for anything blocking them.
Do not open sealed panels, bypass safety switches or try to relight a pilot you are unsure about. If you smell gas, leave the house at once, do not use switches or phones inside, and call the gas utility or 911 from outside. If a carbon monoxide alarm sounds, or anyone feels dizzy, has a headache or feels sick, get everyone outside and call 911. If none of the checks works, call us.
Furnace Repairs We Handle in Denver
We repair gas and electric furnaces.
Blower Motor and Fan Repair
The blower pushes heated air through your home. When the motor or fan fails, the furnace may run but not heat the rooms, or it may make loud noises. We diagnose the cause and repair or replace the part.
Thermostat Repair and Calibration
A thermostat that reads wrong or does not signal the furnace can look like a furnace failure. We test it, recalibrate it, repair it or replace it.
Ignition and Control Problems
Modern furnaces depend on igniters, sensors and control boards. When one fails, the furnace may not start or may shut off after a few seconds. We test these parts and replace what has failed.
Heat Exchanger Concerns
The heat exchanger keeps combustion gases away from the air you breathe. A cracked or damaged exchanger is a serious safety matter. If we find one, we explain what we saw and what your options are, which often means replacing the furnace. See our furnace replacement page.
Gas Furnace and Electric Furnace Repair
Most Denver homes use gas furnaces, and some use electric. We handle both.
Emergency Furnace Repair in Denver
A furnace failure in winter cannot always wait.
If you have no heat, call (720) 390-2652 and tell us the furnace type, what you are seeing and whether anyone at home is elderly, very young or ill, so we can set priority. While you wait, close doors to keep warmth in one room, use blankets and never heat a home with a gas oven or an outdoor grill, because both can produce carbon monoxide.
Furnace Repair or Replacement?
Most repairs are worth making. Replacement starts to make sense when:
- The furnace is more than fifteen years old and keeps failing
- The repair cost is a large share of the price of a new furnace
- The heat exchanger is cracked
- Heating bills keep rising even after repairs
- Parts are hard to find for an older model
We explain both options and let you choose. If a tune-up has not been done in a while, see our furnace maintenance page, which can prevent many of these calls.
What Affects the Cost of Furnace Repair?
We do not quote prices without seeing the furnace, because repairs vary a lot. The main factors:
- The part that failed and whether it is in stock
- The age, make and model of the furnace
- How much diagnosis the problem needs
- Access to the furnace
- Emergency or after-hours service
- Whether other work is found at the same visit
Tell us what is happening and we will explain what to expect.
Why Choose Professional Plumbers Denver?
- Plain answers. We explain what failed and what your options are.
- Estimates before work. You approve the repair before it starts.
- One company for the home. We also handle water heaters, gas lines and plumbing.
- Licensed and insured.
Areas We Serve Around Denver
We provide service in Denver and nearby communities, including Aurora, Lakewood, Englewood, Littleton, Centennial, Highlands Ranch, Castle Rock, Glendale and Greenwood Village. See our service areas page or call us if you are not sure we cover your address.
Frequently Asked Questions About Furnace Repair
Common signs are no heat or weak heat, loud or new noises, short cycling, a yellow or flickering flame, uneven heating and a rising heating bill. If you smell gas, leave the house and call the gas utility or 911 from outside.
It depends on the problem and whether the part is on hand. Many repairs are quick and some need a part to be ordered. We give you a time estimate after diagnosis.
Check that the thermostat is set to heat, the filter is clean and the furnace switch and breaker are on. If it still does not work, call us. Do not open sealed panels or bypass safety switches.
Yes. Call (720) 390-2652 and tell us what is happening, and we will schedule the earliest visit we can.
It depends on the part that failed, the furnace age and model, how much diagnosis is needed and when the visit takes place. We explain the cost before we start work. Treat any online price range as general, not as our pricing.
Most repairs are worth making. Replacement is worth considering when the furnace is more than fifteen years old and keeps failing, the repair is costly compared to a new furnace, or the heat exchanger is cracked. See our furnace replacement page.
This is called short cycling. Common causes are a clogged filter, an overheating furnace, a thermostat problem or a dirty flame sensor. A technician should check it, because it wears the furnace.
It can be. A gas flame should be mostly steady and blue. A yellow or flickering flame can signal poor combustion, which can involve carbon monoxide. Call for service promptly, and if an alarm sounds or anyone feels sick, get outside and call 911.
We repair most major brands. Call us with your furnace brand and model number and we will confirm.
It can reduce them, because a yearly check can catch worn or dirty parts early. It cannot guarantee a furnace never breaks. See our furnace maintenance page.
Call for Furnace Repair in Denver
Tell us what your furnace is doing and we will take it from there. Call (720) 390-2652 for furnace repair in Denver, or send a request through our contact page.
Professional Plumbers Denver, 4400 S Quebec St, Suite 208, Denver, CO 80237.
Looking for other heating help? See our heating services page.



