Garbage Disposal Repair & Installation in Denver, CO
A disposal that hums but won’t spin, a puddle under the sink, a reset button that keeps popping back out. Garbage disposal problems tend to announce themselves, and most are fixable if you deal with them early. Professional Plumbers Denver repairs, replaces and installs garbage disposals in Denver kitchens. Call (720) 390-2652 or request an appointment online.
Enter your contact details here
Professional Garbage Disposal Services in Denver
A disposal looks simple from above the sink, but it is a small system: a motor, a grinding chamber, a sink flange that seals it to the drain, and drain and electrical connections that all have to work together. When one part fails, the symptom you see doesn’t always point to the part at fault. A leak at the bottom might be a loose hose clamp or a failed internal seal, and a slow sink might be the drain, not the disposal.
So we diagnose first and tell you what we find. We handle disposal repair, replacement and new installation, including the sink drain line and the dishwasher connection. If the real problem is a clog in the line, we can clear that too through our drain cleaning service. For other kitchen and bathroom work, see our plumbing fixture services.
Garbage Disposal Repair in Denver
One safety note first: never put your hand in a disposal, even when it is off. If you want to try the basics yourself, switch off the wall switch and the breaker before touching anything. Here is what the common symptoms usually mean.
Garbage Disposal Not Turning On
If the unit is completely silent, start with power. The red reset button on the bottom may have tripped, a breaker or GFCI outlet may be off, or a switch or wire may have failed. Press the reset once after the unit cools down. If nothing happens, the problem is probably electrical rather than mechanical, and we will tell you which side it sits on.
Garbage Disposal Humming but Not Grinding
A hum means the motor has power but can’t turn the grinding plate, almost always because something is jammed. Many units have a hex socket on the underside where a hex key can rock the flywheel free, with the power off. If it still hums after the jam is cleared, or the motor is hot and smells burned, the motor may be failing.
Jammed Garbage Disposal
Bones, fruit pits, bottle caps and silverware wedge between the plate and the impellers. A plumber can usually clear a jam quickly. What matters afterward is the damage check: a hard object can chip an impeller or score the plate, and that is how a one-time jam turns into a unit that never quite works again.
Leaking Garbage Disposal
Where the water appears tells you what’s wrong. Drips near the top point to the sink flange seal. Water at the side usually comes from the dishwasher hose or the discharge pipe, both of which are repairable. Water coming from the body or bottom of the unit generally means an internal seal has failed, and the disposal needs replacing. Our kitchen sink repair and installation page covers the plumbing around it.
Garbage Disposal Making Loud Noises
Rattling or clanking usually means a hard object is loose in the chamber. If the noise or vibration continues once the chamber is clear, look for a loose mounting or worn internal parts. Grinding that gets worse over time is a sign the unit is wearing out.
Garbage Disposal Keeps Tripping the Reset Button
The reset button is an overload protector. It pops when the motor overheats or strains, usually from a jam, a heavy load of food waste or a failing motor. Pressing it over and over without finding the cause wears the unit down. If it trips repeatedly, it’s time for a proper diagnosis.
Garbage Disposal Installation in Denver
The steps are the same whether you’re replacing an old unit or adding a disposal to a sink that never had one. We remove the old unit and its mounting assembly, set the new mount in the sink flange, attach the disposal, and connect it to the sink drain and, if you have one, the dishwasher drain. New units often have a plug in the dishwasher inlet that has to be knocked out first, and missing it causes dishwasher backups. We finish by running water and testing for leaks and operation.
A first-time installation takes more work. The sink needs a drain opening that suits a disposal, and there has to be power under the sink, which may mean a switch or outlet. Replacing an existing unit is usually quicker, and a straightforward replacement typically takes about one to two hours.
Garbage Disposal Replacement Services
A jam, a loose connection or a tripped reset can usually be repaired. Replacement is the more practical choice when:
- The unit keeps failing after repairs
- Water leaks from the body of the disposal
- There is heavy corrosion
- The motor has burned out
- The repair would cost close to a new unit
We also check that a replacement will fit your sink and plumbing: the flange, the existing mount, the discharge pipe height and the space in the cabinet.
Garbage Disposal Maintenance Tips for Denver Homeowners
- Run cold water before, during and for about 15 seconds after grinding, so waste clears the drain.
- Keep grease and cooking oil out. They coat the pipe and harden past the disposal.
- Skip fibrous and stringy waste such as celery, corn husks and artichoke leaves, plus pasta, rice and potato peels, which swell into paste.
- Clean the splash guard with a brush and dish soap. Don’t pour chemical drain cleaners into a disposal.
- Grind small amounts at a time instead of a full sink of scraps.
- Watch for early warning signs: slow draining, odors that persist, new noises or small drips under the sink.
Types of Garbage Disposals
Continuous-feed disposals run while you hold the switch on and feed scraps in, and they are the most common in homes. Batch-feed disposals run only when the stopper is locked in place, which some households prefer for safety. Motor size usually runs from about 1/3 to 1 horsepower. Most households do fine with a 1/2 to 3/4 horsepower unit, and a larger family or heavy daily use may justify more. We’ll recommend what fits your kitchen, not the biggest model.
Garbage Disposal Repair and Installation Cost in Denver
We don’t give prices without seeing the job, because they depend on:
- The type and brand of disposal, and its motor capacity
- The labor involved
- Whether the existing mounting assembly can be reused
- Any plumbing changes at the drain or dishwasher connection
- Electrical connection requirements
- How easy the unit is to reach
- Whether an old unit has to be removed
Tell us what’s going on and we will give you an estimate for your kitchen.
Our Garbage Disposal Service Process
- You call or request an appointment and describe the problem.
- We talk through the symptoms and what you’ve already tried.
- We inspect and diagnose the unit and its connections.
- We explain whether repair or replacement makes sense.
- You get an estimate and approve it before work begins.
- We repair or install the disposal.
- We test it for leaks and proper operation.
Why Choose Professional Plumbers Denver?
- Clear communication. We explain what failed and what your options are.
- Estimates before work. You approve the cost first.
- Repair or replace, honestly. We don’t replace a unit that can be repaired.
- Licensed and insured.
Areas We Serve Around Denver, Colorado
We provide garbage disposal service in Denver and nearby communities, including Aurora, Lakewood, Englewood, Littleton, Centennial, Highlands Ranch, Castle Rock, Glendale and Greenwood Village. If you’re unsure about your address, call us or see our service areas page.
Frequently Asked Questions About Garbage Disposal Services
How much does garbage disposal repair cost in Denver?
It depends on what failed. A jam or loose connection costs far less than a motor or seal failure that leads to replacement, and labor, parts and access all play a part. For one local reference point, Plumbline, another Denver plumber, states that the average Denver installation runs around $450. That is a competitor’s figure, not our pricing; call (720) 390-2652 for an estimate for your kitchen.
Why is my garbage disposal humming but not working?
A hum means the motor is getting power but the grinding plate is stuck, usually from a jam. With the power off, a hex key in the socket under the unit can often free it. If it still hums, or the motor is hot, the motor may have failed and the unit may need replacing.
Can a plumber repair a jammed garbage disposal?
Yes. A plumber clears the jam, checks the impellers and plate for damage, and tests the unit. Most jams are quick to clear, but a hard object can leave damage that causes problems later.
How do I know if my garbage disposal needs replacement?
Replace it if it leaks from the body, the motor has burned out, there is heavy corrosion, or it keeps failing after repairs. If a repair would cost close to a new unit, replacement is usually the better value.
How long does garbage disposal installation take?
A straightforward replacement typically takes about one to two hours, including removal, installation and testing. A first-time installation can take longer if the sink or electrical connection needs work.
Can you repair a leaking garbage disposal?
Sometimes. Leaks at the sink flange, dishwasher hose or discharge pipe are usually repairable. A leak from the body or bottom of the unit generally means an internal seal has failed, and the disposal needs replacing.
Why does my garbage disposal keep tripping the reset button?
The reset button trips to protect the motor from overheating or overload, commonly because of a jam, too much waste at once, or a motor that is wearing out. Resetting it repeatedly without finding the cause shortens the unit’s life, so repeated trips call for a diagnosis.
What should never go into a garbage disposal?
Grease and cooking oil, bones, fruit pits, fibrous or stringy vegetables such as celery and corn husks, and starchy foods like pasta, rice and potato peels. Also keep non-food items, such as silverware and bottle caps, and chemical drain cleaners out.
Do you install different garbage disposal brands?
Yes. We install and repair the major brands, and can install a unit you have already bought. Tell us the brand and model when you call so we can check that it suits your sink and plumbing.
Do you offer same-day garbage disposal repair in Denver?
Same-day appointments are often available, depending on the schedule. Call (720) 390-2652 to ask.
Schedule Garbage Disposal Repair in Denver Today
If your disposal is leaking, jammed or just worn out, tell us what’s happening and we will recommend the next step. Call (720) 390-2652 or request an appointment online.



